|
STEVAL-IPE002V1 Datasheet, PDF (1/4 Pages) STMicroelectronics – Capacitive Power Supply | |||
|
STEVAL-IPE002V1
Features
Electricity Meter (mono phase) - Measurement Board
2 Current Transformers
Data Brief
â Single-phase, 0.5 class accuracy guaranteed
â UNOM(RMS) = 140 to 300V,
INOM/IMAX(RMS) = 2/20A, fLIN = 45 to 65Hz,
TAMB = -40 to +85 °C
t(s) â Tamper detection for power line systems
c â LED checking for:
u â Functioning
rod â No Load Condition
â Tamper Detection
P â Reverse Energy Direction
te â Stepper Motor Display Connector
ole â Capacitive Power Supply
s â SPI Interface Connector:
b â Active, Reactive Apparent Power
- O consumption
) â VRMS, IRMS and Line Frequency
Obsolete Product(s â Status
STEVAL-IPE002V1
Applications
This metering module can be used to build a
Class 0.5 Single-phase standalone or
microprocessor based meter with or without
Tamper detection for power line systems of
UNOM = 140 to 300VRMS, INOM/IMAX = 2/20ARMS,
fLIN = 45 to 65Hz and TAMB = -40 to +85 °C.
In standalone mode, a stepper motor display
should be connected to pins W5 and W6. A user
can select the type of stepper or the constant of
output pulse frequency by changing LVS or KMOT
configurators respectively.
In Microprocessor based mode, a control board
with a microprocessor should be connected to the
male connector P1 of the module using a 10-wire
flat cable.
January 2006
For further information contact your local STMicroelectronics sales office
Rev 1
1/4
www.st.com
4
|
▷ |