STEVAL-IPC001V1 Datasheet, PDF (1/4 Pages) STMicroelectronics – Smartcard manager for reader and writer

STEVAL-IPC001V1
Features
Electronic fiscal cash register
Data Brief
■ 4-Mbyte Flash, 32-Mbyte NAND and 1-Mbyte
SRAM on board
■ Two smartcard readers
■ STM1404 secure chip, FIPS 140-2 compliant
t(s) ■ Ethernet 10Base-T, 3 UARTs, 1 RS-485, 1 PS/
2, 1 USB full speed, 4 x I2C, 1 x SPI, 2 LCDs
uc _{■ Expandable connector for upgrading to a 64-}
d _{Mbyte Flash or 64-Mbyte SRAM}
ro _{■ Firmware available}
P _{■ Cash register demo}
te _{■ TCP/IP stack}
ole ^{■ PS/2 firmware driver}
s _{■ RFID CRX14 driver}
Ob ■ RFID manager
- _{■ Smartcard manager for reader and writer}
t(s) ^{■ Fidelity card demo}
uc _Description
rod ^{The STEVAL-IPC001V1 is an integrated system}
P ^{to allow designers to evaluate a complete and}
ready-to-use cash register application. It is
te _{intended for the low to medium-end POS/cash}
le _{register market and consists of a hardware board,}
o _{firmware and PC GUI (graphical user interface).}
bs ^{At the core of the board, the STR710FZ2}
O^{microcontroller controls all tasks of the system.}
STEVAL-IPC001V1
The PC GUI is a user-friendly PC application to
manage both goods information and board
parameters through a dedicated protocol.
The STR710FZ2 gives the board a wide scope of
communication capabilities, incorporating four
UARTs, one 10T-LAN, one PS/2 interface and
various IC and SPI connectors. The firmware is a
modular suite which simultaneously implements a
typical cash register application and provides a
suitable library to develop an optimized and
customized final application.
September 2008
Rev 2
For further information contact your local STMicroelectronics sales office.
1/4
www.st.com
4