|
STEVAL-ILL060V1 Datasheet, PDF (1/7 Pages) STMicroelectronics – High brightness LED array driver with diagnostics for automotive | |||
|
STEVAL-ILL060V1
High brightness LED array driver with diagnostics for automotive
applications based on the STAP16DPPS05 and STM8A
Data brief
Description
The STEVAL-ILL060V1 is a high brightness LED
array driver evaluation board with diagnostics
based on STMicroelectronicsâ automotive-grade
low voltage, 16-bit constant current LED sink
driver STAP16DPPS05.
The LED driver is configured and controlled
through an 8-bit automotive-grade STM8A
microcontroller via an SPI interface. An A5974D
DC-DC converter, also automotive-grade,
provides the voltages and power needed for
overall operation of the board.
Features
⢠6 - 24 VDC power supply with reverse voltage
protection, short-circuit protection and input
surge protection and standard DC jack input
⢠Backward/forward transition switch to change
modes
⢠SWIM connector for MCU programing and
debugging
⢠Connector for LIN development and evaluation
⢠Potentiometer to change brightness and speed
of patterns
⢠32 white LEDs (PLCC 4)
⢠8 jumpers to simulate open-circuit error
⢠4 jumpers, to simulate short-circuit error
⢠USB-UART bridge to interface board with GUI
⢠Demonstrates pre-configured patterns (with
adjustable brightness/speed) such as rolling
text, wave effect, dot sequence, etc. in stand-
alone mode
⢠Demonstrates basic mode or frame
programming mode with GUI SW
⢠RoHS compliant
May 2014
DocID026325 Rev 1
For further information contact your local STMicroelectronics sales office.
1/7
www.st.com
|
▷ |