STEVAL-ILL020V1 Datasheet, PDF (1/5 Pages) STMicroelectronics – LCD panels backlight demonstration board based on the LED7706

STEVAL-ILL020V1
LCD panels backlight demonstration board
based on the LED7706
Data brief
Features
■ Features boost section
– 4.5 V to 36 V input voltage range
– internal power MOSFET
– internal +5 V LDO for device supply
– up to 36 V output voltage
– constant frequency peak current-mode
control
– 200 kHz to 1 MHz adjustable switching
frequency
– external sync for multi-device application
– pulse-skip power saving mode at light load
– programmable soft-start
– programmable OVP protection
– single ceramic output capacitor
– non-latched thermal shutdown
■ Features backlight driver section
– six rows with 30 mA maximum current
capability (adjustable)
– pp to 10 white LEDs per row
– rows disable option
– less than 500 ns minimum dimming time
(1% minimum dimming duty-cycle at 20
kHz dimming frequency)
– ±2.0% current matching between rows
– LED failure (open and short circuit)
detection
■ RoHS compliant
STEVAL-ILL020V1
The generators can be externally programmed to
sink up to 30 mA and can be dimmed via a PWM
signal (1% dimming duty cycle at 20 kHz can be
managed).
The device allows to detect and manage the open
and shorted LED faults and to let unused rows
floating.
Basic protections (output overvoltage, internal
MOSFET overcurrent and thermal shutdown) are
provided.
Description
This demonstration board is based on the
LED7706 and implements a high efficiency
monolithic boost converter and six controlled
current generators (rows) specifically designed to
supply LEDs arrays used in the backlight of LCD
panels.
The device can manage an output voltage up to
36 V (i.e. ten white-LEDs per row).
May 2009
Doc ID 15675 Rev 1
For further information contact your local STMicroelectronics sales office.
1/5
www.st.com
5