STEVAL-ILH004V1 Datasheet, PDF (1/6 Pages) STMicroelectronics – 70 W electronic ballast for metal halide lamp (HID) based on the L6382D5 and ST7FLITE49K2

STEVAL-ILH004V1
70 W electronic ballast for metal halide lamp (HID)
based on the L6382D5 and ST7FLITE49K2
Data brief
Features
■ Minimum mains voltage (rms value): 85 V
■ Maximum mains voltage (rms value) : 265 V
■ Minimum mains frequency( fmin): 47 Hz
■ Expected bridge efficiency (H-bridge): 95%
■ Rated lamp power (Plamp) : 70 W
■ Rated output power: 73 W
■ Output current: 0.18 A
■ Regulated DC output voltage (V_out ): 410 V
■ Maximum output low-frequency V_out ripple:
20 V
■ PFC minimum switching frequency: 30 kHz
■ Expected PFC efficiency 96 %
■ Expected input section efficiency: 99%
■ Expected power factor: 0.99
■ RoHS compliant
STEVAL-ILH004V1
Description
The STEVAL-ILH004V1 demonstration board
implements a digital ballast for a 70 W HID lamp
(sodium or metal halide) used in general lighting
applications. The ballast is composed of a boost
converter (power factor controller PFC) working in
transition mode and an inverter composed of a
half-bridge that drive the lamp in low-frequency
square wave.
Both the half-bridge and the PFC stage are
managed by the ST7LITE49K2 that controls the
L6382D5, activating all the power switches.
October 2011
Doc ID 022333 Rev 1
For further information contact your local STMicroelectronics sales office.
1/6
www.st.com
6