STEVAL-IHP007V1 Datasheet, PDF (1/8 Pages) STMicroelectronics – Power line communication module for street lighting

STEVAL-IHP007V1
Power line communication module for street lighting
Data brief
Features
 SM6T15CA: Transil 600 W TVS diode
 SMAJ5.0CA-TR: Transil 400 W TVS diode
 ST7580: FSK, PSK multi-mode power line
networking system-on-chip
 STM32F103CBT7: STM32 ARM-based 32-
bit MCU
 STPS1L30: low drop power Schottky rectifier
1 A, 30 V, 0.3 V
 STTH1L06A: Turbo 2 ultrafast high voltage
rectifier
 RoHS compliant
Description
The STEVAL-IHP007V1 evaluation board is a
power line communication module addition to the
STEVAL-ILH007V1 HID ballast module. It
provides functions for the management of street
lighting network architecture in the CENELEC A-
B-D bands.
The module is based on an STM32F103CBT7
ARM Cortex-M3 microcontroller and an ST7580
PSK narrow band power line modem with up to
28.8 kbps data rate. The embedded MCU can be
easily replaced with an equivalent 48-pin MCU
from the STM32F0, STM32F2, STM32F3 families
with a few changes.
The module is designed to work with the
STEVAL-ILH007V1 HID module, but can be
associated with other lighting driver boards with a
standard serial communication port.
Note that this board only functions in a network
with an EVALKITST7580-1 board designated as
the master; this is achieved via UART
commands.
September 2016
DocID027065 Rev 4
For further information contact your local STMicroelectronics sales
office
1/8
www.st.com