|
STEVAL-IHP003V1 Datasheet, PDF (1/4 Pages) STMicroelectronics – Remote-controlled PLM network module based on the ST7540 and STM32F103C8 | |||
|
STEVAL-IHP003V1
Remote-controlled PLM network module
based on the ST7540 and STM32F103C8
Data brief
Features
â PLM communication compliant with
EN50065-1 (band C)
â FSK modulation with low frequency deviation
â Centre frequency 132.5 kHz ± 0.2%
â Bitrate: 2400 bits/s
â Microcontroller for interfacing PLM with STB
â Robust protocol implementation pursuant to
KNX protocol stack (EN50090)
â Plug and play network formation
â Logical network creation
â Master-slave and peer-to-peer network
configuration
â Node self-discovery to enable devices (nodes)
to discover other devices and/or to be
discovered by other devices
â Node admission: automatic, using ID number
stored in each device
â Network address management: selection,
announcements and conflict resolution
â Operating temperature range: 0 °C -50 °C
â RoHS compliant
Description
The STEVAL-IHP003V1 module is a PLM (power
line modem)-based demonstration application
intended as an evaluation platform for the ST7540
FSK power line transceiver and the
STM32F103C8 ARM-based 32-bit
microcontroller.
The module is dedicated to pay television
management, SmartPlug applications, home
appliance networks and various types of remote-
controlled power distribution.
For example, it can be used in hotels to act as an
interface between a set-top box in hotel rooms,
and a service server located at the hotel
reception. Communication is achieved through
STEVAL-IHP003V1
the AC power line, by impressing a 132.5 kHz
carrier signal on the AC wiring system with
frequency shift keying modulation.
The module provides two ports, one dedicated to
the power line connection and the other to a
server connection.
On the top of the module housing, there is a two-
color LED to indicate the operating status of the
module.
In addition to the ST7540 power line transceiver
and STM32F103C8 microcontroller, the module
features an ST3232C for RS-232 interfacing and
a SPAC265-3W AC-DC switched-mode power
supply.
April 2010
Doc ID 17440 Rev 1
For further information contact your local STMicroelectronics sales office.
1/4
www.st.com
4
|
▷ |