STEVAL-IHP002V1 Datasheet, PDF (1/10 Pages) STMicroelectronics – SmartPlug systems to measure and control AC loads, based on the STM32, ST7540 PLM, and STPM01

STEVAL-IHP002V1
SmartPlug systems to measure and control AC loads,
based on the STM32, ST7540 PLM, and STPM01
Data brief
Features
■ Energy consumption monitoring
■ PLM communication
■ On/Off or dimming configuration
■ CENELEC band C compliant
■ System setting by RS232
■ RoHS compliant
Description
The STEVAL-IHP002V1 demonstration board is a
SmartPlug based on the STM32F10x
microcontroller, ST7540 PLM, and STPM01
energy metering ICs. The board is a node of a
PLM network which allows the final user to
monitor and manage the plugged load energy
consumption, and can work in conjunction with
the STEVAL-IHP003V1 used as a data
concentrator for connection to a PC.
The board has been developed as a guideline to
build a home/building automation subsystem for
energy management. It is designed to fit the
dimensions of a standard box for wall installation
and easy integration into home/building electrical
plants. The current, power, energy and other
information related to the electrical load
connected to the SmartPlug board are sent to a
PLM data concentrator (such as the STEVAL-
IHP003V1) through the home/building PLM
network. A protocol stack has been implemented
to allow node communication; it includes a PHY
layer with FEC, a MAC layer with CSMA/CA and
ACK, and a network layer with static addressing
and routing topology.
STEVAL-IHP002V1
March 2011
Doc ID 18235 Rev 2
For further information contact your local STMicroelectronics sales office.
1/10
www.st.com
10