STEVAL-IHP001V3 Datasheet, PDF (1/11 Pages) STMicroelectronics – RoHS compliant

STEVAL-IHP001V3
ZigBee^® SmartPlug demonstration board
based on the STM32F10x, SPZB260-PRO and STPM01
Data brief
Features
■ Monitors energy consumption and electrical
parameters
■ Power network overload prevention and
remote load management in a wireless HAN
■ Network/standalone operating modes
■ Relay/Triac modes for on/off and dimming
features
■ RoHS compliant
Description
The STEVAL-IHP001V3 ZigBee^® SmartPlug
demonstration board employs the STM32F10x
microcontroller, ZigBee SPZB260-PRO module
and STPM01 energy metering IC to implement a
ZigBee meter node which allows the user to
monitor and manage the energy consumption of a
connected load.
The SmartPlug board is a demonstration platform
which provides guidelines for developing a
home/building automation subsystem for energy
management.
In a typical home system implementation, the
board is plugged into an electrical wall socket,
and supplies a home appliance or other generic
electrical load.
Current, power, energy and other information
related to the electrical load connected to the
SmartPlug board can be shown on an LCD
display locally, or sent to a ZigBee data
concentrator through a home/building ZigBee
network.
While the STEVAL-IHP001V3 replaces the
STEVAL-IHP001V2, the hardware for both the V2
and V3 versions of the SmartPlug demonstration
boards are identical. The STEVAL-IHP001V3
differs from the V2 version only in terms of the
ZigBee PRO stack update.
STEVAL-IHP001V3
In addition to the ZigBee PRO stack features, this
update allows the use of the STEVAL-IFS013V2
USB-ZigBee dongle as network coordinator.
April 2010
Doc ID 17415 Rev 1
For further information contact your local STMicroelectronics sales office.
1/11
www.st.com
11