STEVAL-IHM045V1 Datasheet, PDF (1/7 Pages) STMicroelectronics – Suitable for sinusoidal FOC drives

STEVAL-IHM045V1
3-phase high voltage inverter power board for FOC
based on the STGIPN3H60A (SLLIMM™-nano)
Data brief
Features
 Wide-range input voltage (30-270 Vac)
 Maximum power up to 100 W at 230 Vac input
 Based on the STGIPN3H60A SLLIMM™-nano
AC motor drive
 Mounts the VIPer06 fixed frequency offline
converter from the VIPer™ plus family
 Efficient DC-DC power supply (15 V, 3.3 V)
 DC bus voltage power supply connectors
 External 15 V input
 Dedicated connector for interfacing with the
various other ST evaluation boards
 Suitable for sinusoidal FOC drives
 Selectable single or three-shunt current
reading topology with fast operational amplifier
 Configurable for direct motor current sampling
from shunt resistors
 Hardware overcurrent detecting network
 Temperature sensor
 Hall sensor/quadrature encoder inputs
 RoHS compliant
Description
The STEVAL-IHM045V1 system evaluation board
is a 3-phase inverter designed to perform field
oriented control (FOC) of sinusoidal-shaped back-
EMF PMSMs with or without sensors, with
nominal power up to 100 W. This flexible, high-
performance design consists of a 3-phase
inverter bridge based on the STGIPN3H60A
SLLIMM™-nano (small low-loss intelligent
molded module) IPM, 3-phase inverter, 3 A / 600
V very fast IGBT and the VIPer06 fixed frequency
offline converter from the VIPer™ plus family.
The system is specifically designed to achieve
fast and accurate current feedback conditioning,
thereby matching the requirements typical of
high-end applications such as field oriented motor
control.
The board is compatible with 110 and 230 Vac
mains, and includes an auxiliary power supply
stage with the VIPer06 to generate the +15 V and
the +3.3 V supply voltages required by the
application.
Through a dedicated connector, the board can be
interfaced with the STM3210B-EVAL,
STM32100B-EVAL, STM3210E-EVAL,
STM320518-EVAL, STM3220G-EVAL,
STM32303C-EVAL, STM3240G-EVAL (STM32
microcontroller evaluation boards), STEVAL-
IHM022V1 (high density dual motor control
evaluation board based on the STM32F103ZE
microcontroller), STEVAL-IHM039V1 (Dual motor
drive control stage based on the STM32F415ZG
microcontroller) and the STEVAL-IHM033V1
(Control stage based on the STM32F100CB
microcontroller suitable for motor control).
May 2014
DocID025648 Rev 1
For further information contact your local STMicroelectronics sales office.
1/7
www.st.com