STEVAL-IHM025V1 Datasheet, PDF (1/8 Pages) STMicroelectronics – 1 kW 3-phase motor control demonstration board featuring the IGBT SLLIMM™ STGIPL14K60

STEVAL-IHM025V1
1 kW 3-phase motor control demonstration board featuring
the IGBT SLLIMM™ STGIPL14K60
Data brief
Features
■ Min. input voltage: 125 VDC or 90 VAC
■ Max. input voltage: 400 VDC or 285 VAC
■ Max. output power for motors up to 1000 W
■ Regenerative STEVAL-IHM025V1 brake
control feature
■ Input inrush limitation with bypassing relay
■ +15 V auxiliary power supply based on buck
converter with VIPer16
■ Uses IGBT intelligent power module
STGIPL14K60 in SDIP 38L molded package
■ Fully populated board conception with test
points and isolated plastic safety cover
■ Motor control connector for interface with
STM3210B-EVAL board and other ST motor
control-dedicated kits
■ Tachometer input
■ Hall/encoder inputs
■ Possibility to connect a BEMF daughterboard
for sensorless six-step control
■ RoHS compliant
Description
The STEVAL-IHM025V1 demonstration board is
an AC/DC inverter that generates a three-phase
waveform for driving three or two-phase motors
such as induction motors or PMSM motors up to
1000 W, with or without sensors.
The system represents a universal, fully-
evaluated and populated design consisting of a 3-
phase inverter bridge based on the 600 V IGBT
SLLIMM™ (small low-loss intelligent molded
module) in the SDIP 38L package mounted on a
heatsink. The STGIPL14K60 integrates: high
voltage, short-circuit rugged IGBT, and high
voltage gate drivers with advanced features like
integrated op amp suitable for advanced current
sensing. Thanks to this integrated module, the
STEVAL-IHM025V1
system has been specifically designed to achieve
power inversion in a reliable and compact design.
The system architecture of the module is based
on integrated advanced features and is
specifically designed to achieve fast and accurate
conditioning of the current feedback, thereby
matching the typical requirements in field-oriented
control (FOC).
The board is designed to be compatible with
single-phase mains, supplying from 90 VAC to
285 VAC or from 125 VDC up to 400 VDC for DC
voltage.
April 2011
Doc ID 17631 Rev 3
For further information contact your local STMicroelectronics sales office.
1/8
www.st.com
8