STEVAL-IFV002V1 Datasheet, PDF (1/6 Pages) STMicroelectronics – STEVAL-IFV002V1 IPCAM extension board based on the STM32F107VC

STEVAL-IFV002V1
STEVAL-IFV002V1 IPCAM extension board
based on the STM32F107VC
Data brief
Features
■ The IPCAM extension board, based on
STM32, includes the following:
– STEVAL-IFV002V1 board
– CAMERA pepper board
– object files are available for the firmware
■ RoHS compliant
Description
The STEVAL-IFV002V1 demonstration board
implements a camera extension board which is
used to interface a CAMERA board to the
STM3210C-EVAL demonstration board.
This extension board is built around
STMicroelectronic's ARM with a Cortex-M3 core-
based STM32F107VC microcontroller in a 100
pin package.
This extension board consists of a camera board
connector, two female headers which fit on CN8
and CN9 of the EVAL demonstration board, and a
power supply unit required for the camera unit.
The application works on the Web server
implemented on the STM3210C-EVAL
demonstration board.
The camera interface library is implemented on
STM32 to capture the image from the camera.
The board is interfaced with a CAMERA pepper
board.
The camera sensor is mounted on this pepper
board. To capture the image, commands are
provided through an I2C interface. An Ethernet
library is ported on the STM3210C-EVAL
demonstration board to transfer the image
through Ethernet.
DHCP client is also supported on the board to
assign the IP address automatically.
STEVAL-IFV002V1
September 2010
Doc ID 18012 Rev 1
For further information contact your local STMicroelectronics sales office.
1/6
www.st.com
6