STEVAL-IFN003V1 Datasheet, PDF (1/5 Pages) STMicroelectronics – PMSM FOC motor driver based on the L6230 and STM32F103

STEVAL-IFN003V1
PMSM FOC motor driver based on the L6230 and STM32F103
Data brief
Features
■ Input range: 8 V up to 48 V (up to 45 W)
■ STMicroelectronics’ ARM™ Cortex-M3 core-
based STM32F103 microcontroller
■ DMOS fully integrated three-phase motor
driver L6230 in a PowerSO package
■ Four-layer board
■ Sensorless and hall sensors/encoder
■ Current sensing mode: single-shunt resistor
■ Compatible with new version of STM32 FOC
firmware library: STM32 PMSM FOC SDK v3.0
■ Debug connector
■ USB interface for real-time data exchange
■ RoHS compliant
Description
The STEVAL-IFN003V1 demonstration board is
based on STMicroelectronics’ ARM™ Cortex-M3
core-based STM32F103 microcontroller and the
DMOS fully integrated three-phase motor driver
L6230 implementing field-oriented control of a
PMSM motor.
The board is designed as an evaluation
environment for motor control applications in the
range of 8 V - 48 V of DC bus voltage and up to
45 W, exploiting the computational power of the
STM32F103. This microcontroller features
internal 20 KB SRAM and 128 KB Flash, and
SWD debugging. The L6230 DMOS driver
features 2.8 A output peak current, non-
dissipative overcurrent detection/protection,
cross-conduction protection, uncommitted
comparator, thermal shutdown and undervoltage
lockout.
The STEVAL-IFN003V1 is provided with a
specific USB interface for the real-time data
exchange.
Offering dedicated hardware evaluation features,
the STEVAL-IFN003V1 board is designed to help
developers evaluate the device and develop their
own applications. The STEVAL-IFN003V1 can be
used together with the STM32 PMSM single/dual
FOC SDK v3.0 and constitutes a complete motor
control evaluation and development platform.
October 2011
Doc ID 022383 Rev 1
For further information contact your local STMicroelectronics sales office.
1/5
www.st.com
5