STEVAL-IDS001V4M Datasheet, PDF (1/6 Pages) STMicroelectronics – Debug connector

STEVAL-IDS001V4M
868 MHz RF USB dongle based on the SPIRIT1 SPSGRF-868
module
Data brief
Features
 RF SPIRIT1 USB dongle based on
SPSGRF-868 for 868 MHz
 SPSGRF-868 module is based on:
 868 MHz ETSI certified module based
on low-power, low-rate sub-1GHz
SPIRIT1 transceiver.
 Integrated Balun (BALF-SPI-01D3)
 Chip antenna
 On board STM23L low power 32-bit ARM®
Cortex-M3™ microcontroller
 Modulation schemes: 2-FSK, GFSK, MSK,
GMSK, OOK and ASK
 Air data rate: from 1 to 500 kbps
 Full compliant in terms of firmware and GUI
with the SPIRIT1 development kits
 Debug connector
 USB interface
 RoHS compliant
Description
The STEVAL-IDS001V4M evaluation board is for
the SPSGRF-868 ETSI certified module based
on the low-power, low-rate, sub-1GHz SPIRIT1
transceiver. The SPSGRF-868 module integrates
the Balun (BALF-SPI-01D3) and a chip antenna,
and operates in the 868 MHz ISM band. The
board is equipped with an STM32L low power
microcontroller to control the SPIRIT1 and it also
features a USB connector for PC GUI interaction
and firmware updates, like the one available for
SPIRIT1 evaluation kit. An SWD connector allows
the development of specific firmware on the
microcontroller.
July 2015
DocID028059 Rev 1
For further information contact your local STMicroelectronics sales
office
1/6
www.st.com