|
STEVAL-IDI005V1 Datasheet, PDF (1/5 Pages) STMicroelectronics – 2 LEDs and 2 buttons | |||
|
STEVAL-IDI005V1
SP1ML 868 MHz wireless sensor board powered by a coin cell
battery
Data brief
Description
The STEVAL-IDI005V1 is an SP1ML-based
wireless sensor board powered by a CR2032
coin-cell battery. It can communicate with the
STEVAL-SP1ML868 using the P²P AT command
set. The board can be programmed through an
external 5-pin SWD connector.
The board is designed to provide several sample,
sub-GHz, Smart Home and Smart Things
applications, such as heat allocator, smart
remote control and wireless sensor node with
868 MHz sub-GHz connectivity.
Features
ï· Wireless sensor board powered by coin cell
battery, CR2032
ï· 868 MHz sub-GHz connectivity, based on
the SP1ML-868 certified module
ï· Sensors on board:
ï LIS2DH MEMS accelerometer
ï HTS221 humidity and temperature
sensor
ï· ESD protection
ï· 2 LEDs and 2 buttons
ï· SWD connector for debug and
reprogramming
ï· Sample firmware for P²P communication
with the STEVAL-SP1ML868 using AT
commands, to display various sensor data
(motion, humidity, temperature) and board
status on serial utilities like HyperTerminal
ï· RoHS compliant
January 2016
DocID028909 Rev 1
For further information contact your local STMicroelectronics sales
office
1/5
www.st.com
|
▷ |