|
STEVAL-CLP001V1 Datasheet, PDF (1/4 Pages) STMicroelectronics – Demonstration board for PMOLED display power supply based on the STOD2540 | |||
|
STEVAL-CLP001V1
Features
Demonstration board for PMOLED display power supply
based on the STOD2540
Data Brief
â PFM mode control
â Supply voltage from 3.0 V to 5.5 V
â High efficiency over wide range of load (1 mA
to 40 mA)
â Integrated load disconnect switch
â Overvoltage protection with automatic restart
â Soft start with adjustable peak current limit
â Low shutdown current
â Small external inductor
Description
This demonstration board based on STOD2540 is
dedicated to passive matrix OLED (PMOLED)
displays for portable handsets and provides the
pre-charge and biasing voltage of the column
matrix driver.
The current capability of STOD2540 allows
feeding a 1", 1.3" or 1.5" color PMOLED.
STOD2540 is a boost converter that operates
from 3.0 V to 5.5 V and can provide an output
voltage as high as 25 V.
The output current capability is maximum 40 mA
up to 25 V output voltage while the supply voltage
from 3.0 V to 5.5 V
STEVAL-CLP001V1
June 2008
Rev 1
For further information contact your local STMicroelectronics sales office.
1/4
www.st.com
4
|
▷ |