STEVAL-CCA016V1 Datasheet, PDF (1/5 Pages) STMicroelectronics – Filter-free stereo 2.8 W Class-D audio power amplifier demo board with selectable 3D sound effects based on the TS4999

STEVAL-CCA016V1
Filter-free stereo 2.8 W Class-D audio power amplifier
demo board with selectable 3D sound effects based on the TS4999
Data brief
Features
■ Operating range from V_CC= 2.4 V to 5.5 V
■ Dedicated standby mode active low for each
channel
■ Output power per channel: 2.8 W at 5 V into 4
Ω with 10% THD+N
■ Output power per channel: 0.7 W at 3.6 V into
8 Ω with 1% THD+N max.
■ Selectable 3D sound effect
■ Four gain setting steps: 3.5, 6, 9.5 and 12 dB.
■ Low current consumption
■ PSRR: 63 dB typ @ 217 Hz.
■ Fast start-up phase: 7.8 ms
■ Output short-circuit and thermal shutdown
protection
■ RoHS compliant
STEVAL-CCA016V1
Description
This demonstration board is designed to evaluate
the performances of TS4999, that is a stereo fully
differential Class-D power amplifier.
It can drive up to 1.35 W into a 8 Ω load at 5 V per
channel. The device has four different gain
settings utilizing two discrete pins, G0 and G1.
Pop and click reduction circuitry provides low
on/off switch noise while allowing the device to
start within 8 ms.
3D enhancement effects are selected through
one digital input pin that allows more amazing
stereo audio sound.
Two standby pins (active low) allow each channel
to be switched off separately.
The TS4999 is available in a 18 bumps Flip-Chip
package.
June 2009
Doc ID 15864 Rev 1
For further information contact your local STMicroelectronics sales office.
1/5
www.st.com
5