STEVAL-CBL001V1 Datasheet, PDF (1/5 Pages) STMicroelectronics – EEPROM data programming on-socket or via coaxial cable

STEVAL-CBL001V1
Demonstration board for power supply and control for LNB
based on the microcontrollers ST7LNBx
Data Brief
Features
■ Ready-to-use programming and test board with
user friendly graphical user interface or
windows hyper terminal.
■ EEPROM data programming on-socket or via
) _{coaxial cable.}
t(s ■ DiSEqC commands testing controlled by pre-
c _{programmed microntroller and dedicated}
u _{voltage regulator. Full set of DiSEqC}
rod ^{commands can be sent and replies are}
evaluated.
te ^P _Description
ole This demonstration board is used to program
s _{EEPROM data and to test ST7LNBx (0/1)}
b _{microcontrollers on sockets or remotely using a}
O _{coaxial cable (75 Ohms), via DiSEqC commands.}
) ^- _{The board has to be connected to the serial port}
t(s ^{of the PC (COMx).}
c _{The Windows HyperTerminal interface or the}
u _{dedicated graphical interface (ST7LNB}
rod ^{application downloadable on mcu.st.com and}
usable with Windows 2000 and XP) can be used
Obsolete ^{P to send commands.}
STEVAL-CBL001V1
June 2008
Rev 1
For further information contact your local STMicroelectronics sales office.
1/5
www.st.com
5