|
STA328 Datasheet, PDF (1/41 Pages) STMicroelectronics – 2.1 HIGH EFFICIENCY DIGITAL AUDIO SYSTEM | |||
|
STA328
2.1 HIGH EFFICIENCY
DIGITAL AUDIO SYSTEM
1 FEATURES
â Wide supply voltage range (10-36V)
â 3 Power Output Configurations
â 2x40W + 1x80W
â 2x80W
â 1x160W
â Power SO-36 Package
â 2.1 Channels of 24-Bit DDX®
â 100dB SNR and Dynamic Range
â 32kHz to 192kHz Input Sample Rates
â Digital Gain/Attenuation +48dB to -80dB in
0.5dB steps
â 428-bit User Programmable Biquads (EQ) per
Channel
â I2C Control
â 2-Channel I2S Input Data Interface
â Individual Channel and Master Gain/
Attenuation
â Individual Channel and Master Soft and Hard
Mute
â Individual Channel Volume and EQ Bypass
â Bass/Treble Tone Control
â Dual Independent Programmable Limiters/
Compressors
â Automodesâ¢
â 32 Preset EQ Curves
â 15 Preset Crossover Settings
â Auto Volume Controlled Loudness
â 3 Preset Volume Curves
â 2 Preset Anti-Clipping Modes
â Preset Nighttime Listening Mode
â Preset TV AGC
â Input and Output Channel Mapping
â AM Noise Reduction and PWM Frequency
Shifting Modes
â Soft Volume Update and Muting
â Auto Zero Detect and Invalid Input Detect
Muting Selectable DDX® Ternary or Binary
May 2006
Figure 1. Package
PowerSO36 SLUG UP
Table 1. Order Codes
Part Number
Package
STA328
PowerSO36 (Slug Up)
STA32813TR
Tape & Reel
PWM output + Variable PWM Speeds
â Selectable De-emphasis
â Post-EQ User Programmable Mix with default
2.1 Bass Management settings
â Variable Max Power Correction for lower full-
power THD
â 4 Output Routing Configurations
â Selectable Clock Input Ratio
â 96kHz Internal Processing Sample Rate, 24 to
28-bit precision
â QXpander
â Video Application: 576 fs input mode suporting
2 DESCRIPTION
The STA328 is an integrated solution of digital au-
dio processing, digital amplifier control, and DDX-
Power Output Stage, thereby creating a high-pow-
er single-chip DDX® solution comprising of high-
quality, high-efficiency, all digital amplification.
The STA328 power section consists of four inde-
pendent half-bridges. These can be configured via
digital control to operate in different modes. 2.1
channels can be provided by two half-bridges and
a single full-bridge, providing up to 2x40W +
1x80W of power output. 2 Channels can be provid-
ed by two full-bridges, providing up to 2x80W of
power. The IC can also be configured as a single
paralelled full-bridge capable of high-current oper-
ation and 1x160W output.
Also provided in the STA328 are a full assortment
of digital processing features. This includes up to
4 programmable 28-bit biquads (EQ) per channel,
Rev. 3
1/41
|
▷ |