ST95HF Datasheet, PDF (1/93 Pages) STMicroelectronics – Dedicated internal frame controller

ST95HF
Near field communication transceiver
VFQFPN32 5x5 mm
Features
• Belonging to ST25 family, that includes all
NFC/RF ID tag and reader products from
STMicroelectronics
• Operating modes supported:
– Reader/Writer
– Card Emulation (ISO/IEC 14443-3 Type A)
• Hardware features
– Dedicated internal frame controller
– Highly integrated Analog Front End (AFE)
for RF communications
– Transmission and reception modes
– Optimized power management
– Tag Detection mode
– Field Detection mode
• RF communication @13.56 MHz
– ISO/IEC 14443 Type A and B in Reader
and Card Emulation modes
– ISO/IEC 15693 in Reader mode
– ISO/IEC 18092 in Reader and Card
Emulation modes
– MIFARE^® Classic compatible
• Communication interfaces with a Host
Controller
– Serial peripheral interface (SPI) Slave
interface up to 2 Mbps
Datasheet - production data
– Up to 528-byte command/reception buffer
(FIFO) depending on communication
protocol
• 32-lead, 5x5 mm, very thin fine pitch quad flat
(VFQFPN) ECOPACK^®2 package
Applications
Typical protocols supported:
• ISO/IEC 14443-3 Type A and B tags
• ISO/IEC 15693 tags
• ISO/IEC 18000-3M1 tags
• NFC Forum tags: Types 1, 2, 3 and 4
• ST Dual Interface EEPROM
Typical ST95HF applications include:
• Consumer electronics
• Gaming
• Healthcare
• Industrial
Typical ST95HF use cases include:
• NFC-enabled Wi-Fi pairing
• NFC-enabled Bluetooth pairing
• Data exchange
Communications with NFC/RFID tag (reader
mode)
February 2016
This is information on a product in full production.
DocID025630 Rev 4
1/93
www.st.com