ST93C56 Datasheet, PDF (1/13 Pages) STMicroelectronics – 2K 128 x 16 or 256 x 8 SERIAL MICROWIRE EEPROM

ST93C56, 56C
ST93C57C
2K (128 x 16 or 256 x 8) SERIAL MICROWIRE EEPROM
NOT FOR NEW DESIGN
1 MILLION ERASE/WRITE CYCLES, with
40 YEARS DATA RETENTION
DUAL ORGANIZATION: 128 x 16 or 256 x 8
BYTE/WORD and ENTIRE MEMORY
PROGRAMMING INSTRUCTIONS
SELF-TIMED PROGRAMMING CYCLE with
AUTO-ERASE
READY/BUSY SIGNAL DURING
PROGRAMMING
SINGLE SUPPLY VOLTAGE:
– 4.5V to 5.5V for ST93C56 version
– 3V to 5.5V for ST93C57 version
SEQUENTIAL READ OPERATION
5ms TYPICAL PROGRAMMING TIME
ST93C56, ST93C56C, ST93C57C are
replaced by the M93C56
8
1
PSDIP8 (B)
0.4mm Frame
8
1
SO8 (M)
150mil Width
Figure 1. Logic Diagram
DESCRIPTION
This specification covers a range of 2K bit serial
EEPROM products, the ST93C56, 56C specified
at 5V ± 10% and the ST93C57C specified at 3V to
5.5V. In the text, products are referred to as
ST93C56.
The ST93C56 is a 2K bit Electrically Erasable
Programmable Memory (EEPROM) fabricated with
SGS-THOMSON’s High EnduranceSingle Polysili-
con CMOS technology. The memory is accessed
through a serial input (D) and output (Q). The 2K
bit memory is divided into either 256 x 8 bit bytes
or 128 x 16 bit words. The organization may be
selected by a signal applied on the ORG input.
Table 1. Signal Names
S
Chip Select Input
D
Serial Data Input
Q
Serial Data Output
C
Serial Clock
ORG
V_CC
VSS
Organisation Select
Supply Voltage
Ground
D
C
S
ORG
VCC
ST93C56
ST93C57
VSS
Q
AI00881C
June 1997
This is information on a product still in production bu t not recommended for new de signs.
1/13