|
ST8024L Datasheet, PDF (1/35 Pages) STMicroelectronics – Smartcard interface | |||
|
ST8024L
Smartcard interface
Datasheet âproduction data
Features
â Designed to be compatible with the NDS
conditional access system (except
ST8024LTR)
â ISO 7816, GSM11.11 and EMV 4.2 (payment
systems) compatible
SO-28
TSSOP-20
TSSOP-28
â IC card interface
â 3 V or 5 V supply for the ST8024L device (VDD)
â Three specifically protected half-duplex
bi-directional buffered I/O lines to card contacts
C4, C7 and C8
â Step-up converter for VCC generation
separately powered by a 5 V ± 20% supply
(VDDP and PGND)
â 1.8 V ± 6.5%, 3 V or 5 V ± 5% regulated card
supply voltage (VCC) with appropriate
decoupling has the following capabilities:
â ICC < 80 mA at VDDP = 4.75 to 6.5 V
â Handles current spikes of 40 nA up
to 20 MHz
â Controls rise and fall times
â Filtered overload detection at ~120 mA
â Enhanced ESD protection on card side (>6 kV)
â 26 MHz integrated crystal oscillator
â Built-in debounce on card presence contacts
â One multiplexed status signal OFF
â Non-inverted control of RST via pin RSTIN
â Clock generation for cards up to 20 MHz
(divided by 1, 2, 4 or 8 through CLKDIV1 and
CLKDIV2 signals) with synchronous frequency
changes
â Supply supervisor for spike-killing during
power-on and power-off and power-on reset
(threshold fixed internally or externally by
a resistor divider)
â Thermal and short-circuit protection on all card
contacts
â Automatic activation and deactivation
sequences; initiated by software or by
hardware in the event of a short-circuit, card
take-off, overheating, VDD or VDDP dropout
Applications
â Smartcard readers for set-top boxes
â IC card readers for banking
â Identification, pay TV
Table 1. Device summary
Order code
PORADJ/
1.8 V function
ST8024LCDR(1)
ST8024LCTR(1)
ST8024LACDR(1)
PORADJ
PORADJ
1.8 V
ST8024LTR
ST8024LACTR(1)
1.8 V
1.8 V
Temperature
range
â25 to 85 °C
â25 to 85 °C
â25 to 85 °C
â25 to 85 °C
â25 to 85 °C
Package
Packaging
Package
top mark
SO-28 (tape and reel) 1000 parts per reel ST8024LC
TSSOP-28 (tape and reel) 2500 parts per reel ST8024LC
SO-28 (tape and reel) 1000 parts per reel ST8024LAC
TSSOP-20 (tape and reel) 2500 parts per reel ST8024L
TSSOP-28 (tape and reel) 2500 parts per reel ST8024LAC
1. Certified by NDS.
May 2012
This is information on a product in full production.
Doc ID 17709 Rev 5
1/35
www.st.com
1
|
▷ |