ST7MDTX-EMU2 Datasheet, PDF (1/4 Pages) STMicroelectronics – REAL-TIME DEVELOPMENT TOOLS FOR THE ST7 MCU FAMILY

ST7MDTx-EMU2
REAL-TIME DEVELOPMENT TOOLS
FOR THE ST7 MCU FAMILY
FEATURES
s A common Hardware Development System
mainframe supports the entire ST7 family of
MCUs, in conjunction with the appropriate
ST7xxx-DBE Dedicated Board Emulator.
s Real-time source level emulation allows viewing
and breakpoint setting on high level source
code rather than on disassembled target code
for optimum user friendliness.
s 64 KBytes of user modifiable and configurable
emulation RAM, allows memory mapping of all
ST7 family devices as well as modelling
hypothetical memory configurations.
s Unlimited breakpoints may be set for any op-
code fetch or any address access, and
conditions may be defined for the generation of
2 external synchronization signals.
s 1K by 32-bit wide trace memory for Logic
Analyzer allows complex and sequential events
to be defined on any combination of address
and data, as well as 3 internal and 5 external
logic signals.
s Logic Analyzer events may trigger a breakpoint
or simply define data capture parameters, in
accordance with user preferences.
s Simple connection of the emulator system to the
Host PC via RS-232 serial channel or via
parallel port¹⁾
s Emulation system may be driven by a Windows-
based GNU debugger software or DOS
software running on host PC, allowing full
control and monitoring of hardware resources.
s Multiple windows allow concurrent real-time
display of source code, MCU resources, internal
registers, trace data, etc.
s Log files allow storage and subsequent
redisplay of any displayed screen for
subsequent analysis.
s Command files can be used to execute a set of
debugger commands in batch mode.
s Editable configuration files ensure tailoring of
working environment to user preferences.
Note 1. On the ST7-EMU2 version of the Emulator.
February 2000
1/4
123