ST7MDT25-T64 Datasheet, PDF (1/3 Pages) STMicroelectronics – TQFP64 (14x14) connection kit for ST7MDT25-DVP3

ST7MDT25-T64/DVP
TQFP64 (14x14) connection kit for ST7MDT25-DVP3
Features
Figure 2. TQFP64 device adapter (DB543)
■ TQFP64/44 adapter (DB612)
Allows the connection of your ST7MDT25-
DVP3 emulator to your application board in
) place of your ST7.
t(s ^{■ TQFP64 (14x14) device adapter (DB543)}
c _{Adapts the emulator connection to the}
u _{package of your ST7.}
rod ^{■ CAB TQFP64 (14x14) socket and cover (CAB}
3303262 and CAB 3303307)
te ^{P Solders to your application board to allow}
connection of the emulator or installation of
le _{your ST7.}
bso _Description
- ^O The TQFP64 (14x14) connection kit (ST7
) _{MDT25-T64/DVP) provides the hardware you}
t(s ^{need to connect your ST7MDT25-DVP3 emulator}
c ^{to your application when debugging applications}
u for ST7 microcontrollers in the TQFP64 (14x14)
d _package.
ro _{The two 50-pin flat cables for connection between}
P _{the emulator and the adapter are provided with}
te your ST7MDT25-DVP3 emulator.
Obsole ^{Figure 1. TQFP64/44 adapter (DB612)}
Figure 3. Connection to application board
3. Plug flat cables into
the corresponding
connectors J1 and J2 on
the adapter
4. Plug the W2 and W1
connectors on the
adapter into the
corresponding
connectors on the
device adapter
2. Align pin
indicators, then
secure the
Orientation
indicators
Pin 1
indicators
device adapter
to the socket
1. Solder socket to
application board
MS30124V1
November 2011
Doc ID 11625 Rev 2
1/3
www.st.com
3