ST7MDT25-T44 Datasheet, PDF (1/3 Pages) STMicroelectronics – The two 50-pin flat cables for connection between

ST7MDT25-T44/DVP
TQFP44 (10x10) Connection Kit for ST7MDT25-DVP3
DATA BRIEF
The TQFP44 (10x10) Connection Kit (ST7
MDT25-T44/DVP) provides the hardware you
need to connect your ST7MDT25-DVP3 emulator
to your application when debugging applications
for ST7 microcontrollers in the TQFP44 (10x10)
package.
Figure 2. TQFP44 device adapter (DB613)
Connection Kit Contents
■ TQFP64/44 adapter (DB612) – Allows the
) connection of your ST7MDT25-DVP3 emulator
t(s ^{to your application board in place of your ST7.}
c ■ TQFP44 (10x10) device adapter (DB613) –
u _{Adapts the emulator connection to the package}
d _{of your ST7.}
ro _{■ Yamaichi TQFP44 socket (IC149-044-052-}
P _{S5) – solders to your application board to allow}
te ^{connection of the emulator or installation of}
le ^{your ST7.}
o _{The two 50-pin flat cables for connection between}
bs the emulator and the adapter are provided with
O ^{your ST7MDT25-DVP3 emulator.}
t(s) ^{- For more information...}
c ^{■ ST7-DVP3 User Manual – Information}
u common to all DVP3 series emulators
d _{■ ST7MDT25-DVP3 Probe User Guide –}
ro _{Information specific to ST7MDT25-DVP3}
Figure 3. Connection to application board
3. Plug flat cables into the
corresponding connectors
J1 and J2 on the adapter
4. Plug the W1 and W2
connectors on the adapter
into the corresponding
connectors on the device
adapter.
Orientation
Indicators
Obsolete ^{P Figure 1. TQFP64/44 adapter (DB612)}
2. Align pin 1 indicators,
then secure the device
adapter to the socket.
Pin 1
Indicators
1. Solder socket to
application board.
September 2005
Rev 1
1/3
www.st.com
3