ST7MDT25-T32 Datasheet, PDF (1/3 Pages) STMicroelectronics – TQFP32 (7x7) Connection Kit for ST7MDT25-DVP3

ST7MDT25-T32/DVP
TQFP32 (7x7) Connection Kit for ST7MDT25-DVP3
DATA BRIEF
The TQFP32 (7x7) Connection Kit (ST7MDT25-
T32/DVP) provides the hardware you need to
Figure 2. TQFP32 device adapter (DB522)
connect your ST7MDT25-DVP3 emulator to your
application when debugging applications for ST7
microcontrollers in the TQFP32 (7x7) package.
t(s) ^{Connection Kit Contents}
c _{■ TQFP32 adapter (DB615) – Allows the}
du connection of your ST7MDT25-DVP3 emulator
ro ^{to your application board in place of your ST7.}
P ■ TQFP32 (7x7) device adapter (DB522) –
te ^{Adapts the emulator connection to the package}
of your ST7.
ole ^{■ Ironwood TQFP32 socket (SK-UGA06/32A-}
s _{01) – solders to your application board to allow}
b _{connection of the emulator.}
- ^{O Replacing the TQFP32 (7x7) device adapter with}
) your ST7 is possible using the Ironwood clam
t(s ^{shell socket (ref: CA-QFE32SA-L-Z-T-02-D1442).}
The clam shell socket is not provided in the kit.
duc _{For more information...}
Pro ■ ST7-DVP3 User Manual – Information
common to all DVP3 series emulators
lete ^{■ ST7MDT25-DVP3 Probe User Guide –}
Obso ^{Information specific to ST7MDT25-DVP3}
Figure 3. Connection to application board
2. Plug device adapter (DB522)
into the corresponding connector
on the adapter (DB615).
3. Plug the adapter’s connectors into
the J1 and J2 connectors on the target
emulation board.
Figure 1. TQFP32 adapter (DB615)
4. Align pin 1 indicators, then
insert the socket’s pins into the
connector on the device adapter.
1. Solder socket to application board.
Pin 1
Indicators
September 2005
Rev 1
1/3
www.st.com
3