ST7MDT20 Datasheet, PDF (1/3 Pages) STMicroelectronics – TQFP64 (14x14) Connection Kit for ST7MDT20-DVP3

ST7MDT20-T64/DVP
TQFP64 (14x14) Connection Kit for ST7MDT20-DVP3
DATA BRIEF
The TQFP64 (14x14) Connection Kit (ST7
MDT20-T64/DVP) provides the hardware you
need to connect your ST7MDT20-DVP3 emulator
to your application when debugging applications
for ST7 microcontrollers in the TQFP64 (14x14)
package.
Figure 2. TQFP64 device adapter (DB543)
Connection Kit Contents
■ One additional 50-pin flat cable required for
connection between emulator and the adapter.
■ TQFP80/64/44 adapter (DB530) – Allows the
connection of your ST7MDT20-DVP3 emulator
to your application board in place of your ST7.
■ TQFP64 (14x14) device adapter (DB543) –
Adapts the emulator connection to the package
of your ST7.
■ CAB TQFP64 (14x14) socket and cover
(CAB 3303262 and CAB 3303307) – solders to
your application board to allow connection of
the emulator or installation of your ST7.
For more information...
■ ST7-DVP3 User Manual – Information
common to all DVP3 series emulators
■ ST7MDT20-DVP3 Probe User Guide –
Information specific to ST7MDT20-DVP3
Figure 1. Flat cable and adapter
TQFP 80/64/44 Adapter (DB530)
Figure 3. Connection to application board
3. Plug flat cables into the
corresponding connectors
J1 and J2 on the adapter
4. Plug the W1 and W2
connectors on the adapter
into the corresponding
connectors on the device
adapter.
2. Align pin 1 indicators,
then secure the device
adapter to the socket.
Orientation
Indicators
Pin 1
Indicators
Additional 50-pin flat cable
1. Solder socket to
application board.
October 2005
Rev 1
1/3
www.st.com
3