ST7MDT20-T6A Datasheet, PDF (1/3 Pages) STMicroelectronics – One additional 50-pin flat cable required for connection between emulator and the adapter

ST7MDT20-T6A/DVP
TQFP64 (10x10) Connection Kit for ST7MDT20-DVP3
DATA BRIEF
The TQFP64 (10x10) Connection Kit (ST7
MDT20-T6A/DVP) provides the hardware you
Figure 2. TQFP64 device adapter (DB583)
need to connect your ST7MDT20-DVP3 emulator
to your application when debugging applications
for ST7 microcontrollers in the TQFP64 (10x10)
package.
ct(s) ^{Connection Kit Contents}
du ■ One additional 50-pin flat cable required for
ro ^{connection between emulator and the adapter.}
P ■ TQFP80/64/44 adapter (DB530) – Allows the
te ^{connection of your ST7MDT20-DVP3 emulator}
to your application board in place of your ST7.
ole ^{■ TQFP64 (10x10) device adapter (DB583) –}
s _{Adapts the emulator connection to the package}
b _{of your ST7.}
O _{■ Yamaichi TQFP64 (10x10) socket and cover}
) ^{- (IC149-064-075-B5) – solders to your}
t(s ^{application board to allow connection of the}
emulator or installation of your ST7.
duc _{For more information...}
Pro ^{■ ST7-DVP3 User Manual – Information}
common to all DVP3 series emulators
te _{■ ST7MDT20-DVP3 Probe User Guide –}
le _{Information specific to ST7MDT20-DVP3}
Obso ^{Figure 1. Flat cable and adapter}
Figure 3. Connection to application board
3. Plug flat cables into the
corresponding connectors
J1 and J2 on the adapter
Orientation
Indicators
4. Plug the W1 and W2
connectors on the adapter
into the corresponding
connectors on the device
adapter.
Pin 1
Indicators
TQFP 80/64/44 Adapter (DB530)
2. Align pin 1 indicators,
then secure the device
adapter to the socket.
Additional 50-pin flat cable
1. Solder socket to
application board.
October 2005
Rev 1
1/3
www.st.com
3