ST7MDT10-32 Datasheet, PDF (1/3 Pages) STMicroelectronics – SDIP32/SO28 Connection Kit for ST7MDT10-DVP3

ST7MDT10-32/DVP
SDIP32/SO28 Connection Kit for ST7MDT10-DVP3
DATA BRIEF
The SDIP32/SO28 Connection Kit (ST7 MDT10-
32/DVP) provides the hardware you need to
connect your ST7MDT10-DVP3 emulator to your
application when debugging applications for ST7
microcontrollers in SDIP32 and SO28 packages.
Figure 2. Additional 26-pin flat cable
Connection Kit Contents
■ One additional 26-pin flat cable required for
connection between emulator and the adapter.
■ SDIP32 adapter (DB585) – Allows the
connection of your ST7MDT10-DVP3 emulator
to your application board in place of your ST7
in SDIP32 package.
■ SDIP32-SO28 device adapter (DB359) –
Adapts the pin out of the SDIP32 adapter to the
SO28 footprint of the ST7 on your application
board.
For more information...
■ ST7-DVP3 User Manual – Information
common to all DVP3 series emulators
■ ST7MDT10-DVP3 Probe User Guide –
Information specific to ST7MDT10-DVP3
Figure 3. SDIP32 application board connection
2. Plug flat cables into the
corresponding J1 and J2
connectors on the adapter
3. Align pin 1 indicators, then
insert the pins of the SDIP32
adapter into the socket on the
application board.
Pin 1
Indicators
1. Solder socket to
application board.
Figure 1. SDIP32 adapter (DB585)
Figure 4. With DIP32-SO28 device adapter
SDIP32 adapter (DB585)
October 2005
SDIP32-SO28 device
adapter (DB359)
Rev 1
1/3
www.st.com
3