ST7MDT10-20 Datasheet, PDF (1/3 Pages) STMicroelectronics – DIP20/SO20 Connection Kit for ST7MDT10-DVP3

ST7MDT10-20/DVP
DIP20/SO20 Connection Kit for ST7MDT10-DVP3
DATA BRIEF
The DIP20/SO20 Connection Kit (ST7 MDT10-
20/DVP) provides the hardware you need to
connect your ST7MDT10-DVP3 emulator to your
application when debugging applications for ST7
microcontrollers in DIP20 and SO20 packages.
Connection Kit Contents
■ DIP20 adapter (DB586) – Allows the
connection of your ST7MDT10-DVP3 emulator
to your application board in place of your ST7.
■ DIP20-DIP20 device adapter (DB535) –
Adapts the pin out of the DIP20 adapter to the
DIP20 footprint of the ST7 on your application
board.
■ DIP20-SO20 device adapter (DB093) –
Adapts the DIP20 adapter to SO20 footprint of
the ST7 on your application board.
The 34-pin flat cable for connection between the
emulator and adapter is provided with your
ST7MDT10-DVP3 emulator.
For more information...
■ ST7-DVP3 User Manual – Information
common to all DVP3 series emulators
■ ST7MDT10-DVP3 Probe User Guide –
Information specific to ST7MDT10-DVP3
Figure 1. DIP20 adapter, DIP20 device adapter
DIP20 adapter (DB586)
Figure 2. DIP20 application board connection
2. Plug flat cable into the
J1 connector on the
adapter
3. Align pin 1 indicators, then
insert the pins of the DIP20
adapter into the DIP20-DIP20
device adapter.
4. Align pin 1 indicators, then
insert the pins of the DIP20-
DIP20 device adapter into the
socket on the application
board.
Pin 1
Indicators
1. Solder socket to
application board.
The pinouts of certain microcontrollers are askew
by 90° from the pinout of the DIP20 adapter. The
connection to an application requires the use of
the DIP20-DIP20 for the following supported
devices:
Figure 3. DIP20 adapter, SO20 device adapter
DIP20 adapter (DB586)
DIP20-DIP20 device
adapter (DB535)
October 2005
DIP20-SO20 device
adapter (DB093)
Rev 1
1/3
www.st.com
3