ST7MDT10-16 Datasheet, PDF (1/3 Pages) STMicroelectronics – This adapter is provided by default when ordering

ST7MDT10-16/DVP
DIP16/SO16 Connection Kit for ST7MDT10-DVP3
DATA BRIEF
The DIP16/SO16 Connection Kit (ST7MDT10-
16/DVP) provides the hardware you need to
Figure 2. DIP16 application board connection
connect your ST7MDT10-DVP3 emulator to your
application when debugging applications for ST7
microcontrollers in DIP16 and SO16 packages.
t(s) ^{Connection Kit Contents}
c _{■ DIP16/SO16 device adapter (DB587) – Allows}
du the connection of your ST7MDT10-DVP3
ro ^{emulator to your application board in place of}
your ST7 in DIP16 or SO16 package.
te ^{P This adapter is provided by default when ordering}
le ^{the ST7MDT10-DVP3 emulator (ordering code:}
ST7MDT10-DVP3) and the ST7MDT10-DVP3
so target emulation board (ST7MDT10-TEB/DVP).
b _{The 34-pin flat cable for connection between the}
O _{emulator and adapter is provided with your}
) ^{- ST7MDT10-DVP3 emulator.}
ct(s ^{For more information...}
du ■ ST7-DVP3 User Manual – Information
ro ^{common to all DVP3 series emulators}
P _{■ ST7MDT10-DVP3 Probe User Guide –}
te ^{Information specific to ST7MDT10-DVP3}
2. Remove the SO16 adapter
3. Plug flat cable into the J1
connector on the adapter
4. Align pin 1 indicators, then
insert the pins of the DIP16
adapter into the socket on the
application board.
Pin 1
Indicators
1. Solder socket to
application board.
Figure 3. SO16 application board connection
Obsole ^{Figure 1. DIP16/SO16 device adapter (DB587)}
For SO16
connection
2. Plug flat cable into the J1
connector on the adapter
3. Align pin 1 indicators, then
insert the SO16 connection pins
into the corresponding connector
on the device adapter.
Pin 1
Indicators
1. Solder SO16 connection
pins to application board.
October 2005
Rev 1
1/3
www.st.com
3