ST75C176 Datasheet, PDF (1/13 Pages) STMicroelectronics – LOW POWER RS-485/RS-422 TRANSCEIVER

ST75C176
LOW POWER
RS-485/RS-422 TRANSCEIVER
s LOW QUIESCENT CURRENT: 300µA
s DESIGNED FOR RS-485 INTERFACE
APPLICATIONS
s -7V TO 12V COMMON MODE INPUT
VOLTAGE RANGE
s DRIVER MAINTAINS HIGH IMPEDANCE IN
3-STATE OR WITH THE POWER OFF
s 70mV TYPICAL INPUT HYSTERESIS
s 30ns PROPAGATION DELAYS, 5ns SKEW
s OPERATE FROM A SINGLE 5V SUPPLY
s CURRENT LIMITING AND THERMAL
SHUTDOWN FOR DRIVER OVERLOAD
PROTECTION
s ALLOWS UP TO 32 TRANSCEIVERS ON
THE BUS
s BIC MOS TECHNOLOGY
DESCRIPTION
The ST75C176 is al low power transceiver for
RS-485 and RS-422 communication. Each part
contains one driver and one receiver.
This transceiver draw 300µA (typ.) of supply
current when unloaded or fully loaded with
disabled drivers.
DIP
SOP
It operates from a single 5V supply.
Driver is short-circuit current limited and is
protected against excessive power dissipation by
thermal shutdown circuitry that placed the driver
outputs into a high-impedance state. The receiver
input has a fail safe feature that guarantees a
logic-high output if the input is open circuit.
The ST75C176 is designed for bi-directional data
communications on multipoint bus transmission
line (half-duplex applciations).
ORDERING CODES
Type
ST75C176CN
ST75C176BN
ST75C176CD
ST75C176BD
ST75C176CDR
ST75C176BDR
Temperature
Range
0 to 70 °C
-40 to 85 °C
0 to 70 °C
-40 to 85 °C
0 to 70 °C
-40 to 85 °C
Package
DIP-8
DIP-8
SO-8 (Tube)
SO-8 (Tube)
SO-8 (Tape & Reel)
SO-8 (Tape & Reel)
Comments
50parts per tube / 40tube per box
50parts per tube / 40tube per box
100parts per tube / 20tube per box
100parts per tube / 20tube per box
2500 parts per reel
2500 parts per reel
June 2003
1/13