ST75185_06 Datasheet, PDF (1/21 Pages) STMicroelectronics – Multiple RS-232 drivers and receivers

ST75185
Multiple RS-232 drivers and receivers
General features
■ Meets and exceeds the requirements of
EIA/TIA-232-E and ITUV.28 standard
■ Single chip with easy interface between UART
and serial port connector of IBM PC/AT^TM and
compatibles
■ Designed to support data rates up to 120kbps
■ Pinout compatible with ST75C185
Description
The ST75185 contains three drivers and five
receivers. The pinout matches the DB9S
connector design in order to decrease the part
count, reduce the board space required and allow
easy interconnection of the UART and serial port
connector of IBM PC/AT^TM and compatibles. The
bipolar circuits and processing of the ST75185
provides a rugged low-cost solution for this
function at the expense of quiescent power and
external passive components relative to the
ST75C185.
The ST75185 complies with the requirements of
the EIA/TIA 232-E and ITU (formally CCITT) v.28
standards. These standards are for data
SO-20
TSSOP20
interchange between a host computer and
peripheral at signalling rates up to 20k-bits/s. The
switching speeds of the ST75185 are fast enough
to support rates up to 120K-bits/s with lower
capacitive loads (shorter cables). Interoperability
at the higher signalling rates cannot be assured
unless the designer has design control of the
cable and the interface circuits at the both ends.
For interoperability at signalling rates to 120 K-
bits/s, use of EIA/ITA-423-B (ITU v.10) and
EIA/ITA-422-B (ITU v.11) standards are
recommended.
The ST75185 is characterized for operation over
the range of 0°C to 70°C.
Order code
Part number
ST75185CTR
ST75185CDR
Temperature range
0 to 70 °C
0 to 70 °C
June 2006
Package
TSSOP20 (Tape & Reel)
SO-20 (Tape & Reel)
Rev 16
Packaging
2500 parts per reel
1000 parts per reel
1/21
www.st.com
21