ST72E311_01 Datasheet, PDF (1/101 Pages) STMicroelectronics – 8-BIT MCU WITH 8 TO 16K OTP/EPROM, 384 TO 512 BYTES RAM, ADC, WDG, SCI, SPI AND 2 TIMERS

ST72E311
ST72T311
8-BIT MCU WITH 8 TO 16K OTP/EPROM,
384 TO 512 BYTES RAM, ADC, WDG, SCI, SPI AND 2 TIMERS
DATASHEET
s User Program Memory (OTP/EPROM):
8 to 16K bytes
s Data RAM: 384 to 512 bytes including 256 bytes
of stack
s Master Reset and Power-On Reset
s Low Voltage Detector Reset option
s Run and Power Saving modes
s 44 or 32 multifunctional bidirectional I/O lines:
– 15 or 9 programmable interrupt inputs
– 8 or 4 high sink outputs
PSDIP42
CSDIP42W
– 8 or 6 analog alternate inputs
– 13 alternate functions
– EMI filtering
s Software or Hardware Watchdog (WDG)
s Two 16-bit Timers, each featuring:
– 2 Input Captures ¹⁾
– 2 Output Compares ¹⁾
– External Clock input (on Timer A)
PSDIP56
CSDIP56W
– PWM and Pulse Generator modes
s Synchronous Serial Peripheral Interface (SPI)
s Asynchronous Serial Communications Interface
(SCI)
s 8-bit ADC with 8 channels ²⁾
s 8-bit Data Manipulation
s 63 basic Instructions and 17 main Addressing
Modes
s 8 x 8 Unsigned Multiply Instruction
s True Bit Manipulation
s Complete Development Support on DOS/
WINDOWS^TM Real-Time Emulator
s Full Software Package on DOS/WINDOWS^TM
(C-Compiler, Cross-Assembler, Debugger)
TQFP64
TQFP44
(See ordering information at the end of datasheet)
Notes:
1. One only on Timer A.
2. Six channels only for ST72T311J.
Device Summary
Features
ST72T311J2
ST72T311J4
ST72T311N2
ST72T311N4
Program Memory - bytes
8K
16K
8K
16K
RAM (stack) - bytes
384 (256)
512 (256)
384 (256)
512 (256)
Peripherals
Watchdog, Timers, SPI, SCI, ADC and optional Low Voltage Detector Reset
Operating Supply
3 to 5.5 V
CPU Frequency
8MHz max (16MHz oscillator) - 4MHz max over 85°C
Temperature Range
- 40°C to + 125°C
Package
TQFP44 - SDIP42
TQFP64 - SDIP56
Note: The ROM versions are supported by the ST72314 family.
May 2001
Rev. 1.8
1/101
1