|
ST6G3237B Datasheet, PDF (1/16 Pages) STMicroelectronics – Dual supply level translator for SD/ MINISD / T-FLASH | |||
|
ST6G3237B
Dual supply level translator for SD/ MINISD / T-FLASH
Features
â High speed:
â tPD = 6.2ns (Max.) at TA = 85°C
â VCCB = 3.0V
â VCCA = 2.3V
â Low power dissipation:
â ICCA = ICCB = 5µA (Max.) at TA = 85°C
â Balanced propagation delays:
â TPLH â TPHL
â Power down protections on inputs and outputs
â 26⦠series resistor on A-Side
â Operating voltage range:
â VCCA (OPR) = 1.4V to VCCB
â VCCB (OPR) = 1.4V to 3.6V
â Latch-up performance exceeds 500mA
(JESD17)
â ESD performance:
â HBM > 2kV (MIL STD 883 method 3015);
â ROHS compliant for µTFBGA25 package
Description
The ST6G3237B is a dual supply low voltage
CMOS Level Translator for SD/MiniSD/T-Flash
fabricated with sub-micron silicon gate and five-
layer metal wiring C2MOS technology. Designed
for use as an interface between a 3.3V bus and a
2.5V or 1.8V bus in a mixed 3.3V/1.8V, 3.3V/2.5V
and 2.5V/1.8V supply systems, it achieves high
speed operation while maintaining the CMOS low
power dissipation.
µTFBGA25
The A port is designed to track VCCA. The B port
is designed to track VCCB.
This IC is intended for two-way asynchronous
communication between data buses and the
direction of data transmission is determined by
CMD-dir/DATA0-dir/DAT123-dir inputs. The B-port
interfaces with the 3V bus, the A-port with the
2.5V and 1.8V bus.
All inputs are equipped with protection circuits
against static discharge, giving them ±2kV ESD
immunity and transient excess voltage.
The ST6G3237B is VCCB = 0V tolerant, achieving
very low current consumption when the VCCB is
grounded.
Figure 1. Device summary
Part number
ST6G3237BTBR
Package
µTFBGA25
Packaging
Tape and reel
June 2007
Rev 1
1/16
www.st.com
16
|
▷ |