ST62T00C Datasheet, PDF (1/70 Pages) STMicroelectronics – 8-BIT OTP/EPROM MCUs WITH A/D CONVERTER, OSCILLATOR SAFEGUARD, SAFE RESET AND 16 PINS

ST62T00C/T01C
ST62T03C/E01C
8-BIT OTP/EPROM MCUs WITH A/D CONVERTER,
OSCILLATOR SAFEGUARD, SAFE RESET AND 16 PINS
s 3.0 to 6.0V Supply Operating Range
s 8 MHz Maximum Clock Frequency
s -40 to +125°C Operating Temperature Range
s Run, Wait and Stop Modes
s 5 Interrupt Vectors
s Look-up Table capability in Program Memory
s Data Storage in Program Memory:
User selectable size
s Data RAM: 64bytes
s User Programmable Options
s 9 I/O pins, fully programmable as:
– Input with pull-up resistor
– Input without pull-up resistor
– Input with interrupt generation
– Open-drain or push-pull output
– Analog Input (except ST62T03C)
s 3I/O lines can sink up to 20mA to drive LEDs or
TRIACs directly
s 8-bit Timer/Counter with 7-bit programmable
prescaler
s Digital Watchdog
s Oscillator Safe Guard
s Low Voltage Detector for Safe Reset
s 8-bit A/D Converter with up to 4 analog inputs
s On-chip Clock oscillator can be driven by Quartz
Crystal Ceramic resonator or RC network
s Power-on Reset
s One external Non-Maskable Interrupt
s ST626x-EMU2 Emulation and Development
System (connects to an MS-DOS PC via a
parallel port)
DEVICE SUMMARY
DEVICE
ST62T00C
ST62T01C
ST62T03C
ST62E01C
OTP
(Bytes)
1036
1836
1036
-
EPROM
(Bytes)
-
-
-
1836
I/O Pins
9
9
9
9
Analog
inputs
4
4
None
4
PDIP16
PSO16
SSOP16
CDIP16W
(See end of Datasheet for Ordering Information)
August 1999
Rev. 2.8
1/70
1