ST6-EPB Datasheet, PDF (1/3 Pages) STMicroelectronics – In-situ programming

ST6-EPB
ST6 EPROM programmers
Data brief
Features
■ Programming of ST6 devices with EPROM or
OTP memory
■ Dedicated EPB for each ST6 microcontroller
) family with support for all corresponding
t(s ^packages
c ■ In-situ programming
du ^{■ Parallel or serial connection to host PC}
ro ^{■ The EPB programming boards are delivered in}
P ^{a complete package that includes:}
te ^{– Programming board with complete range of}
sockets
le _{– Power supply}
so _{– Parallel or 25-pin serial cable for host PC}
b _interface
O _{– Software tools on CD-ROM}
t(s) ^{- Description}
c _{The ST6-EPB programming board is designed for}
du ^{single-site programming of EPROM or OTP ST6}
ro ^{microcontrollers.}
P _{The ST6-EPB supports two operating modes,}
te ^{either in standalone mode, or whilst connected to}
a PC.
ole _{In standalone mode, microcontrollers can be}
s _{programmed by simple key operation. The}
Ob^{programmer also supports Blank-check and Verify}
Table 1. Device summary
Part number
Reference
ST6-EPB
– ST62E2XC-EPB for
ST62E0x/T0x/E1x/T1x/E2x/T2x
devices
– ST62E3X-EPB for
ST62E3x/T3x devices
tests in standalone mode.
– ST62E4XB-EPB for
The ST6-EPB can be also connected via a serial
ST62E4x/T4x devices
or parallel interface to a host PC running the ST6
Windows EEPROMER (WINEE software). The
– ST62E6XC-EPB for
ST62E5x/T5x/E6x/T6x devices
ST6 EPROM offers Read, Program, Verify and
Blank-check features along with many other
functions.
October 2010
Doc ID 18050 Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
3