ST6-EMU2 Datasheet, PDF (1/4 Pages) STMicroelectronics – ST6-EMU2 emulator

ST6-EMU2
Features
■ Step-by-step debugging
■ Breakpoints
■ 2 trigger outputs
■ Analyzer probe input connector for up to 4
external signals
■ Parallel port interfaces to the host PC
■ Clock frequency up to 8 MHz
■ Emulation voltage: 5 V
■ ST6 assembler and linker, AST6 and LST6
■ ST6 Windows debugger, WGDB6
■ Windows ST6 microcontroller programmer,
Epromer
■ ST62GP-EMU2 box with two flat cables for
connecting a probe
■ One DB324/DIP probe board for use with
ST6230, ST6218 and ST6228 target devices
■ One DB324/SDIP42 probe board for use with
the ST6232 target device
■ One DB448 probe board for use with ST620x,
ST621x and ST622x target devices
■ One DB449 probe board for use with 5x and 6x
devices, including:
– 16-pin probe with 3 different male-male
interfaces, depending on the target device
– 20-pin probe with 3 different male-male
interfaces, depending on the target device
– 28-pin probe with 3 different male-male
interfaces, depending on the target device
■ Analyser probes
■ Three probe adapters—DIP16, DIP20 and
DIP28—to be soldered to a footprint
■ Three SO adapters—SO16, SO20 and SO28
■ One parallel interface cable (Ref.:
DB25M/DB25M)
■ One power adapter
ST6-EMU2 emulator
Data brief
■ One power cable
■ Two ferrites to be clipped over the flat cables
(for EMC compliance)
Description
The ST6-EMU2 provides you with all you need to
develop and debug programs for ST6
microcontrollers.
STMicroelectronics' ST6-EMU2 emulators are
cost-effective solutions that provide both high
quality, emulation and programming capability to
support ST6 application development.
Emulators are delivered with WGDB6, which
allows debugging of ST6 applications using a
Windows PC as the user interface.
Windows Epromer allows the user to program
application code in the ST6 EPROM.
October 2010
Doc ID 18105 Rev 1
For further information contact your local STMicroelectronics sales office.
1/4
www.st.com
4