ST2349A Datasheet, PDF (1/23 Pages) STMicroelectronics – 4-bit dual supply level translator without direction control pin

Features
■ 90 Mbps (max) data rate when driven by a
totem pole driver
■ 8 Mbps (max) data rate when driven by an
open drain pole driver
■ Bi-directional level translation without
direction control pin
■ Wide V_L voltage range of 1.65 to 3.6 V
■ Wide V_CC voltage range of 1.80 to 5.5 V
■ Power down mode feature – when either
supply is off, all I/Os are in high impedance
■ Low quiescent current (max 24 µA)
■ Able to be driven by totem pole and open drain
drivers
■ 5.5 V tolerant enable pin
■ ESD performance on all pins: ±2 kV HBM
■ Small package and footprint
QFN16 (2.6 x 1.8 mm) package
Applications
■ Low voltage system level translation
■ Mobile phones and other mobile devices
■ I²C level translation
■ UART level translation
ST2349A
4-bit dual supply level translator
without direction control pin
Preliminary Data
QFN16L
(2.6 x 1.8 mm)
Description
The ST2349A is a 4-bit dual supply level
translator which provides the level shifting
capability to allow data transfer in a multi-voltage
system. Externally applied voltages, V_CC and V_L,
set the logic levels on either side of the device. It
utilizes transmission gate-based design that
allows bi-directional level translation without a
control pin.
The ST2349A accepts a V_L from 1.65 to 3.6 V
and V_CC from 1.80 to 5.5 V, making it ideal for
data transfer between low-voltage ASICs/PLD
and higher voltage systems. This device has a tri-
state output mode which can be used to disable
all I/Os.
The ST2349A supports power down mode when
V_CC is grounded/floating and the device is
disabled via the OE pin.
Table 1.
Device summary
Order code
ST2349AQTR
Package
QFN16 (2.6 x 1.8 mm)
Packaging
Tape and reel (3000 parts per reel)
July 2008
Rev 4
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to
change without notice.
1/23
www.st.com
23