|
ST2349 Datasheet, PDF (1/23 Pages) STMicroelectronics – 4-bit dual supply level translator without direction control pin | |||
|
ST2349
4-bit dual supply level translator
without direction control pin
Features
â 45 Mbps (max) data rate when driven by a
totem pole driver
â 4 Mbps (max) data rate when driven by an
open drain pole driver
â Bi-directional level translation without
direction control pin
â Wide VL voltage range of 1.65 to 3.6 V
â Wide VCC voltage range of 1.80 to 5.5 V
â Power down mode feature â when either
supply is off, all I/Os are in high impedance
â Low quiescent current (max 24 µA)
â Able to be driven by totem pole and open drain
drivers
â 5.5 V tolerant enable pin
â ESD performance on all pins: ±2 kV HBM
â Small package and footprint
QFN16 (2.6 x 1.8 mm) package
Applications
â Low voltage system level translation
â Mobile phones and other mobile devices
â I2C level translation
â UART level translation
QFN16L
(2.6 x 1.8 mm)
Description
The ST2349 is a 4-bit dual supply level translator
which provides the level shifting capability to allow
data transfer in a multi-voltage system. Externally
applied voltages, VCC and VL, set the logic levels
on either side of the device. It utilizes
transmission gate-based design that allows bi-
directional level translation without a control pin.
The ST2349 accepts a VL from 1.65 to 3.6 V and
VCC from 1.80 to 5.5 V, making it ideal for data
transfer between low-voltage ASICs/PLD and
higher voltage systems. This device has a tri-state
output mode which can be used to disable all
I/Os.
The ST2349 supports power down mode when
VCC is grounded/floating and the device is
disabled via the OE pin.
Table 1.
Device summary
Order code
ST2349QTR
Package
QFN16 (2.6 x 1.8 mm)
Packaging
Tape & reel (3000 parts per reel)
November 2007
Rev 3
1/23
www.st.com
23
|
▷ |