|
ST20-PPI Datasheet, PDF (1/6 Pages) STMicroelectronics – PC PARALLEL PORT TO OS-LINK INTERFACE | |||
|
ST20-PPI
®
PC PARALLEL PORT TO OS-LINK INTERFACE
PRODUCT INFORMATION
FEATURES
⢠Desktop mounted parallel port to differential
OS-Link interface
⢠Standard 25 way D-type parallel port connec-
tion
⢠Standard 26 way D-type differential OS-Link
connection
⢠Plug top power supply
⢠Supports nibble, byte and EPP mode parallel
port standards
DESCRIPTION
The ST20-PPI parallel port to OS-Link interface is
a host interface to allow connection from a PC par-
allel port to any OS-Link based ST20 development
board such as the ST20450-SAB. The interface
plugs into any standard PC 25 way D-type parallel
port. Supported parallel port modes are:
⢠Nibble mode
⢠Byte mode
⢠EPP mode
depending on which mode the host PC can sup-
port. Connection to the development target is via a
differential OS-Link connector, as used on the IMS
B300 and ST20450-Development Board. Once
connected, the development target can be ac-
cessed with the standard ST20 Toolset using the
MS Windows drivers supplied.
January 1996
1/6
42 1679 00
|
▷ |