SPZB260ADP Datasheet, PDF (1/11 Pages) STMicroelectronics – Adapter board

SPZB260ADP
Features
■ Easy interface for SPZB260 module
■ Single supply from 2.1 to 3.6 V
■ Two 6-pin connectors to access EZSP
■ 10 pin InSight™ port connector for debug
■ Access to SIF signals
■ Access to the InSight™ Desktop packet trace
interface
■ LEDs for link activity indication
Adapter board
Description
SPZB260ADP is the adapter board for the
ZigBee^® module SPZB260.
It provides an easy way to interface the SPZB260
module with the development kit during the
development and deployment phase of a ZigBee^®
application.
It contains two 6 pins connectors to access the
EmberZNet™ serial protocol (EZSP) and the
SPZB260 module SPI, SIF signals and voltage
supply; in addition a keyed 10 pin connector allow
the connectivity of the SIF and PTI signals with
the InSight™ Desktop for debug.
A LED indicator is driven by a Link Activity signal
to provide a visual indication of the module
behavior.
As SPZB260ADP is a passive interface of the
SPZB260 module, for the electrical
characteristics, please refer to the SPZB260
module datasheet.
April 2008
Rev 1
1/11
www.st.com
11