SPZB260-PRO Datasheet, PDF (1/15 Pages) STMicroelectronics – ZigBee® module

SPZB260-PRO
ZigBee^® module
Features
■ Integrated 2.4 GHz, IEEE 802,15,4-compliant
transceiver:
– 3 dBm nominal TX output power
– -95 dBm RX sensitivity
– + 5 dBm in boost mode
– RX filtering for co-existence with IEEE
802.11g and Bluetooth devices
– Integrated VCO and loop filter
■ IntegratedIEEE802.15.4PHYandMAC
■ Controlled by a standard serial line for an easy
interface of host microcontrollers (SPI)
■ Embedded flash and integrated RAM for
program and data storage
■ On board 24 MHz stable crystal
■ Integrated RC oscillator (typ. 10 kHz) for low
power operation
■ 1 μA power consumption in deep sleep mode
■ Watchdog timer and power-on reset
■ Pins available for non-intrusive debug interface
(SIF)
■ Single supply voltage 2.1 to 3.6 Vdc
■ Available link and activity outputs for external
indication / monitor
■ CE compliant ^(a)
■ FCC compliant (FCC ID:S9NZB260A) ^(a)
Applications
■ Industrial controls
■ Sensor networking
■ Monitoring of remote systems
a. SPZB260-PRO is based on the same unmodified HW
of SPZB260 module.
The same certification statements apply.
■ Home applications
■ Security systems
■ Lighting controls
Description
SPZB260-PRO is a low power consumption
ZigBee® module optimized for embedded
applications. It enables OEMs to easily add
wireless capability to electronic devices.
The module is based on SN260 ZigBee® network
processor which integrates a 2.4 GHz, IEEE
802.15.4-compliant transceiver as well as IEEE
802.15.4 PHY and MAC.
24 MHz high stability crystal is integrated in the
module to perform the timing requirements as per
ZigBee® specifications.
A single supply voltage is requested to power the
module. A 2.5 GHz specific Murata antenna is
integrated in the module. The voltage supply
determines the I/O ports level allowing an easy
interface with the host system.
The module is controlled by means of a standard
serial interface (SPI) allowing the connections to a
variety of host microcontrollers.
For other information and details, please refer to
SN260 datasheet available at www.st.com
April 2009
Doc ID 15614 Rev 1
1/15
www.st.com
15