|
SPT01-335DEE Datasheet, PDF (1/16 Pages) STMicroelectronics – Automation sensor transient and overvoltage protection | |||
|
SPT01-335DEE
Automation sensor transient and overvoltage protection
QFN 3x3 6+3 lead
SPT01-235DEE
Figure 1. SPT01-335 configuration diagram
LS
V+
K
D1
D2
D3
HS
V-
A
Figure 2. SPT01-335 bottom view
D1
HS
1
D2
D3
V-
A
LS
V+
K
HS
V+
4
A
Features
⢠Triple diode array for power bus protection,
switch protection and reverse blocking
protection
Datasheet â production data
⢠Flexible connection for NPN low side or PNP
high side sensor configuration
⢠6 V to 36 V supply voltage range
⢠Stand-off voltage: 36 V
⢠Minimum breakdown voltage VBR: 38 V
⢠8/20 µs 2A maximum clamping voltage: 46 V
⢠Direct sensor switch current: 300 mA
⢠Blocking diode drop forward voltage VF:
1 V at 300 mA
⢠Blocking diode maximum 10 ms square pulse
current IFSM: 1 A
⢠Ambient temperature: -40 °C to +100 °C
⢠QFN3x3-6L 1 mm flat package: 3x3 mm
⢠Voltage surge: EN 60947-5-2 or
IEC 61000-4-5 with RCC = 500 Ω: ±1 kV
⢠Electrostatic discharge ESD, IEC 61000-4-2:
± 8 kV in contact, ± 15 kV in air
⢠Electrical transient immunity, IEC 61000-4-4:
±2 kV
Benefits
⢠Compliant for interface with logic input type 1,
2 and 3 IEC 61131-2 standard
⢠Recommended to protect any 3-wire sensor
compliant with EN 60947-5-2 standard
⢠Highly compact with integrated power solution
in SMD version
Applications
⢠Factory automation sensor application
⢠Proximity sensor interface protection
⢠Transient and surge voltage protection
⢠Compliant with sensor standard, EN60947-5-2
May 2013
This is information on a product in full production.
DocID15200 Rev3
1/16
www.st.com
16
|
▷ |