SPDC12L00010 Datasheet, PDF (1/24 Pages) STMicroelectronics – 10 A DC/DC converter module

SPDC12L00010
Features
■ MTBF 1 000 000 (T_A = 25 °C)
■ 10 A max output current
■ Input voltage range from 1.8 V to 14 V
■ Supply voltage range from 4.5 V to 14 V
■ Fixed or adjustable output voltage
down to 0.6 V
■ Fixed frequency voltage mode control
■ Adjustable switching frequency
■ Soft-start and inhibit
■ Selectable UVLO threshold (5 V or 12 V bus)
■ Master/slave synchronization with 180° phase
shift
■ Pre-bias start-up capability
■ Selectable source/sink or source only
capability after soft-start
■ Power Good output with programmable delay
■ Over voltage protection with selectable
latched/not-latched mode
■ Thermal shut-down
■ Operating temperature range -40 °C ÷ 85 °C
10 A DC/DC converter module
Preliminary Data
Applications
■ Laptop
■ Blade servers
■ RAID systems
■ Network routers
■ Cellular base stations
■ Industrial equipment
■ Test instrumentation
■ Medical diagnostic equipment
■ Points of load regulation
Table 1. Device summary
Order code
Output voltage
[V]
Input voltage
[V]
SPDC12L00010
0.6 ÷ 5
1.8 ÷ 14
Output ripple
[mVpp]
40
Efficiency
[%]
70 ÷ 93
Notes
Progr. output
voltage
October 2008
Rev 1
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to
change without notice.
1/24
www.st.com
24