SPC570SADPT64S Datasheet, PDF (1/3 Pages) STMicroelectronics – Single 12 V external power supply

SPC570SADPT64S,
SPC570SADPT100S
SPC570Sx microcontroller premium evaluation boards
Data brief
 Open top MCU socket
 Flexible MCU clocking options
 40 MHz crystal EVB clock circuit
 8 MHz EVB clock oscillator circuit
 external clock via SMA connector
 User reset switch with reset status LEDs
 Debug ports interface:
 14-pin standard JTAG connector
 34-pin connector for Nexus 2 interface
 38-pin Mictor connector for Nexus
level 3+ debug and trace interface
 Minimodule dimension: 127 mm X 114 mm
Features
 SPC570Sx modular evaluation system
 Single 12 V external power supply
 Four on-board regulators:
 5.0 V, 3.3 V and 1.25 V switching
regulators
 5 V linear regulator for the ADC
supplies and references
 Master power switch and regulator status
LEDs
 Two 240-way high-density expansion
connectors for MCU daughter cards
 All MCU signals readily accessible at a port-
ordered group of 0.1” pitch headers
 RS232/SCI physical interface and standard
DB9 female connector
 Two FlexRAY channels interface with a DB9
connector (for both transceivers) and two
alternative connectors
 LINFlexD interface with two different style
connectors
 Two high speed CAN channels and two
female standard DB9 connectors
 Ethernet interface with a standard RJ45
Ethernet connector
 One potentiometer for analog voltage input
and four user switches and 4 user LEDs,
freely connectable
Description
The SPC570Sx Premium Evaluation Boards
System supports the 32-bit SPC570Sx
STMicroelectronics' automotive microcontrollers
(ASIL-D compliant).
The complete system consists of an
SPC57XXMB motherboard and an
SPC570SADPTx daughter card which plugs into
the motherboard. Different daughter cards are
available for evaluating the whole family of device
in all supported packages. All daughter cards are
similar in design and concept.
The evaluation system (motherboard and
daughter card) allows full access to the CPU, all
of the CPU's I/O signals, and the motherboard
peripherals (such as CAN, SCI, LIN and
FlexRAY). The daughter card itself can be used
as a standalone unit when access to the I/O pins
or peripherals is not needed.
Table 1: Device summary
Order code
Reference
SPC57XXMB
Motherboard for SPC57x
family devices
SPC570SADPT100S
Daughter card for SPC570Sx
MCU in eTQFP100 package
SPC570SADPT64S
Daughter card for SPC570Sx
MCU in eTQFP64 package
June 2015
DocID027968 Rev 1
1/3
For further information contact your local STMicroelectronics sales
office
www.st.com