SPC56XXMB Datasheet, PDF (1/4 Pages) STMicroelectronics – Two LIN channels with jumper enable

SPC56XXMB
SPC56xx microcontroller family evaluation motherboard
Features
■ SPC56xx modular evaluation system
■ On/off power switch with LED indicators
■ Board power supply: 12 VDC external supply
voltage
■ Onboard STMicroelectronics^® L9758 voltage
regulator with three simultaneous output at
1.2 V, 3.3 V and 5 V
■ Possibility to configure onboard peripherals to
operate at 5 V or 3.3 V logic levels, depending
on target
■ Two CAN channels with jumper enable
– One CAN channel with High-Speed
transceiver and DB9 male connector
– One CAN channel with Low-Speed Fault
Tolerant and High-Speed transceiver
(selectable with jumpers) and DB9 male
connector
■ Two LIN channels with jumper enable
– One channel with transceiver and pin
header connector populated
– One channel with footprints only
■ One SCI channel with jumper enables,
transceiver and DB9 female connector
■ Two FlexRay channels with jumper enables
– One channel with transceiver and DB9
male connector
– One channel with footprint only
■ Four user push buttons with jumper enable and
polarity selection
■ Four user LED’s with jumper enables
■ One potentiometer for analog voltage input
■ Pin array for accessing all I/O signals
■ Expansion connectors for accessing all I/O
signals
■ Prototyping area with 0.1” spacing and SOIC
footprint
Data brief − production data
■ Specifications:
– Board size 5.5” x 9.0”
– 12 VDC Center Positive power supply with
2.5/5.5 mm barrel connector
Description
The SPC56XXMB motherboard is an evaluation
system supporting STMicroelectronics'
SPC560xx microprocessors.
The complete system consists of an
SPC56XXMB motherboard and an
SPC56xxxADPT mini module (not included)
which plugs into the motherboard.
Different mini modules are available for
evaluating the different devices in the SPC560xx
family of microprocessors.
The evaluation system (motherboard and mini
module) allows full access to the CPU, all of the
CPU's I/O signals, and the motherboard
peripherals (such as CAN, SCI, LIN).
September 2012
Doc ID 023625 Rev 2
This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
1/4
www.st.com
1