English
Language : 

SPC56P-DISCOVERY Datasheet, PDF (1/6 Pages) STMicroelectronics – Reset push button
SPC56P-Discovery
SPC560P-DISP: Discovery+ evaluation board
Features
• SPC560P50L5 32-bit 64MHz e200z0h
CPU;32-bit Power Architecture® Technology
CPU, 576 KB Flash in an LQFP144 package.
• Shield Connectors (Arduino compatible).
• On-board USB-JTAG PLS debugger and HW
selection mode to use stand-alone JTAG
debuggers (2 x 7 male 100mil connector).
• Free 128 Kbyte code size limited debugging
• Board power supply: from the USB bus (5 V
supply voltage) or through external +12 V PSU.
• All GPIOs and DSPI/USB signals accessible by
a 4x37 100mil pin grid array allowing
connection of an additional boards for
dedicated applications.
• CAN, K-LINE, LIN, FlexRay interfaces.
• Main power switch.
• Reset push button.
• 2 potentiometers for ADC evaluation
• 12 MHz crystal.
• Board size 152 x 103 mm
Data brief - production data
Description
The SPC560P-DISP Discovery+ kit helps to
discover SPC560 P line Power Architecture
Microcontrollers with full access to CPUs, GPI/O's
and peripherals such as CAN, JTAG, K-Line, LIN
at budget price.
Dedicated connectors allow plugging Arduino
shields (Arduino-compatible).
Free ready-to-run application firmware examples
are available inside SPC5Studio
(www.st.com/spc5studio) to support quick
evaluation and development.
SPC5Studio includes visual configurable code
generation engine, board support package (BSP),
start-up routines, interrupt services, free RTOS
(optional) and a full set of low level drivers.
SPC5Studio includes HighTec GNU "C" compiler,
with a 30-days full free trial support. SPC5Studio
is available for free download.
The SPC560 P line is designed to address cost
sensitive chassis, airbag, electrical hydraulic
power steering (EHPS), electric power steering
(EPS), and electrical motor control applications.
An E2E Community is available on ST WEB.
Table 1. Device summary
Order code
Reference
SPC560P-DISP
SPC56P DISCOVERY+
with SPC560P50L5
March 2014
DocID025950 Rev 2
This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
1/6
www.st.com