SPC56D-DISCOVERY Datasheet, PDF (1/4 Pages) STMicroelectronics – A potentiometers for ADC input

SPC56D-Discovery
SPC560D-DIS Discovery evaluation board
Features
• SPC560D40L1 32-bit 48 MHz e200z0h CPU,
32-bit Power Architecture® Technology CPU,
256 kB Code Flash in an LQFP64 package.
• On-board USB-JTAG PLS debugger and HW
selection mode to use stand-alone JTAG
debuggers.
• Board power supply: through external +12 V
PSU or from the USB bus (5 V supply voltage).
• Seven LEDs: D6 for 5 V power on,D2 for Reset,
D101, D102, D103 for PLS debugger section,
D7 and D8 for PC3 and PC2 outputs (for user)
• Two push buttons (reset and user)
• A potentiometers for ADC input (user)
• Two extension headers (2 x 36 pin - 100 mil) for
all LQFP64 pins and for quick connection to
prototyping boards, additional modules and
easy probing.
• JTAG interface (2 x 7 male 100 mil connector)
• USB port (mini -B)
• 16 MHz crystal
• Specification:
• Board size 100 x 55 mm
• MCU: SPC560D40L1 - LQFP64
• 2 extension headers 2 x 36 pin - 100 mil
• DC connector (+12 V input)
• Mini USB - B
• JTAG 2 x 7 - 100 mil connector
Data brief - production data
Description
The SPC560D-DIS Discovery is a low cost and
quick way to discover SPC56 D line.
Based on SPC56D40L1, the discovery board
includes a JTAG debugger from PLS, LEDs, push
buttons and extension headers to connect
prototyping boards or additional modules.
PLS UDE software is available for free download
and includes a perpetual 256 kByte.
debugging/programming license.
Free ready-to-run application firmware examples
are available inside SPC5Studio to support quick
evaluation and development.
SPC5Studio includes visual configurable code
generation engine, board support package (BSP),
startup routines, interrupt services, free RTOS
(optional) and a full set of low level drivers.
SPC5Studio includes HighTec GNU "C" compiler,
with a 30-days full free trial support. SPC5Studio
is available for free download.
The SPC56 D line is designed to address the
specific need of entry level car body applications
but as well many other markets where high
temperature operation, high reliability, low power
stand-by operation with quick wake up and real-
time loads diagnostic are required. An E2E
Community is available on ST WEB to get ST
experts support in getting started quickly with
SPC56 microcontrollers.
Table 1. Device summary
Order code
Reference
SPC560D-DIS
SPC56D-Discovery with
SPC560D40L1
July 2015
DocID025157 Rev 3
This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
1/4
www.st.com