SPC564BXX Datasheet, PDF (1/123 Pages) STMicroelectronics – Up to 80 MHz and 75 MIPs operation

SPC564Bxx
SPC56ECxx
32-bit MCU family built on the Power Architecture^® for automotive
body electronics applications
Datasheet - production data
LBGA256
LQFP208
LQFP176
(17 x 17 x 1.7 mm) ^{(28 x 28 x 1.4 mm) (24 x 24 x 1.4 mm)}
Features
 e200z4d, 32-bit Power Architecture^®
– Up to 120 MHz and 200 MIPs operation
 e200z0h, 32-bit Power Architecture
– Up to 80 MHz and 75 MIPs operation
 Memory
– Up to 3 MByte on-chip Flash with ECC
– Up to 256 KByte on-chip SRAM with ECC
– 64KByte on-chip Data Flash with ECC
– 16-entry memory protection unit (MPU)
– User selectable Memory BIST
 Interrupts
– 255 interrupt sources with 16 priority levels
– Up to 54 ext. IRQ including 30 wake-up
 GPIOs: from 147 (LQFP176) to 199
(LBGA256)
 System timer units
– 8-ch. 32-bit periodic interrupt timer (PIT)
– 4-channel 32-bit system timer (STM)
– Safety System Watchdog Timer (SWT)
– Real-time clock timer (RTC/API)
 eMIOS, 16-bit counter timed I/O units
– Up to 64 channels with PWM/MC/IC/OC
 Two ADC (10-bit and 12-bit)
– Up to 62 channels extendable to 90 ch.
– Multiple Analog Watchdog
 Dedicated diagnostic features for lighting
– Advanced shiffted PWM generation
– ADC conversion synchronized on PWM
 Communication interfaces
– Up to 6 FlexCAN with 64 buffers each
– Up to 10 LINFlex/UART channels
– Up to 8 buffered DSPI channels
– I²C interface
– One FleyRay (dual-ch.) with 128 buffers
– Fast Ethernet Controller
 Cryptographic Services Engine (CSE)
– AES-128 en/decryption, CMAC auth.
– Secured device boot mode
 32-ch. eDMA with multiple request sources
 Clock generation
– 4 to 40 MHz main oscillator
– 16 MHz internal RC oscillator
– Software-controlled FMPLL
– 128 kHz internal RC oscillator
– 32 kHz auxiliary oscillator
– Clock Monitoring Unit (CMU)
 Low power capabilities
– Ultra low power STANDBY
– CAN Sampler to store CAN ID in STBY
– Fast wake-up and exectute from RAM
 Exhaustive debugging capability
– Nexus 3+ interface on LBGA256 only
– Nexus 1 on all devices
 Voltage supply
– Single 5 V or 3.3 V supply
– On-chip Vreg with external ballast transitor
 Operating temperature range -40 to 125 °C
March 2016
This is information on a product in full production.
DocID17478 Rev 9
1/123
www.st.com